PP1PTFE-EX
Pneumatic membrane pump, PP body
Applications: Lubricants, waste oil, diesel, coolant, transmission fluid, windshield cleaner, solvents, etc.
Pneumatic membrane pump, PP body
Descriptive
Pump marking: Ex II2 GD IIB/IIC 95°C.
Pumps designed for the transfer of aggressive and/or viscous liquids.
Plastic pumps are recommended for strong acids and for bases.
Dry self-priming pumps.
The priming height varies depending on whether the pump is dry or wet.
Adjustable flow rate by adjusting the pressure and flow rate of the air (see the accessories).
In case of dry running, the pump continues to run without overheating or wear.
If the delivery of liquid is stopped, the pump stops automatically without getting damaged.
Characteristics
| Fluid | Used oil, Windshield washer, Cooling liquid, Transmission fluid, Lubricants, Solvents |
|---|---|
| Technology | Membrane |
| ATEX | Yes |
| Pump marking | Ex II2 GD IIB/IIC 95°C |
| Pump | Bare |
| Max flow rate | 100l/min |
| Orifice | 1’’ |
| Materials | Conductive PP |
| Balls | PTFE |
| Sockets | Stainless steel |
| Other contact parts | Stainless steel |
| Max. viscosity | 5000 cPo |
| Pressure | 8 bars |
| Dry membrane | 4,5 m |
| Wet membrane | 7 m |
| Air consumption | from 3 to 30 Nm3/h |
| Membrane | PTFE |
| Particles | 4 mm |
Complementary accessories
You may also be interested by:
